request for floorboards
Moderator: GreenLake
2 posts
• Page 1 of 1
request for floorboards
by thomas » Mon May 28, 2007 12:46 pm
just got thhe go ahead this am. to start a restoration of an older ds2, has most of its stuff, and Ive yet to do an inventory and thorough inspection, but I know right upfront that she'll need floorboards, so...does anyone have or know an available set OR can someone supply me with tracings or plans for them and mounting procedure?
- thomas
- Posts: 42
- Joined: Mon May 28, 2007 12:37 pm
- Location: Phoenixville PA
by Sean McGuire » Mon May 28, 2007 2:03 pm
Hey Thomas,
Are you sure it is a DSII? DSII's have a one-piece molded top that runs from stem to stern and makes a raised floor above the hull. There is airspace between the floor and the hull. If your boat has (or had) wood slats on the floor, it is likely a DSI. My DSII is all fiberglass except for the removable cuddy doors - also not found on a DSI. There have been several posts on the DSI page about the floor slats - how to repair, replace, etc.
Sean McGuire
Are you sure it is a DSII? DSII's have a one-piece molded top that runs from stem to stern and makes a raised floor above the hull. There is airspace between the floor and the hull. If your boat has (or had) wood slats on the floor, it is likely a DSI. My DSII is all fiberglass except for the removable cuddy doors - also not found on a DSI. There have been several posts on the DSI page about the floor slats - how to repair, replace, etc.
Sean McGuire
- Sean McGuire
- Posts: 51
- Joined: Thu Jun 01, 2006 3:58 pm
- Location: Central North Carolina
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 19 guests