by Sean McGuire » Mon May 28, 2007 2:03 pm
Hey Thomas,
Are you sure it is a DSII? DSII's have a one-piece molded top that runs from stem to stern and makes a raised floor above the hull. There is airspace between the floor and the hull. If your boat has (or had) wood slats on the floor, it is likely a DSI. My DSII is all fiberglass except for the removable cuddy doors - also not found on a DSI. There have been several posts on the DSI page about the floor slats - how to repair, replace, etc.
Sean McGuire