Transom
Posted: Sun Mar 01, 2026 4:02 pmWhen I pulled Truelove in the fall, I noticed the gudgeons were loose. The plywood reinforcement had gone punky.
I cut it out with a multitool, and glassed in a new piece. After rough sanding the raw fiberglass I skim coated it with Bondo. I’ll paint it after I sand it again.
I cut it out with a multitool, and glassed in a new piece. After rough sanding the raw fiberglass I skim coated it with Bondo. I’ll paint it after I sand it again.